MSVHFS1-6 - Selectable Very High Frequency Lowpass/Bandpass Filter Print E-mail
description

The MSVHFS1-6 is a selectable very high frequency  lowpass/bandpass filter CMOS integrated circuit.The lowpass response can be a 6 pole Butterworth, Elliptic or Bessel filter.  The band pass response can be a six pole full, third or sixth octave bandpass filter. The device uses switched-capacitor filters (SCF) and no external components (except for decoupling capacitors) are required, An external clock is needed for the filter functions.  Lower current, and lower frequencies are pin selected.

An externally selectable gain setting pin, along with a power down and clock to corner ratio select pin are included in the 16 pin version.

 

features

Low Voltage: 3.0 VDC
Six Filter Types In One Package
No External Components
Switched-Capacitor Filters
Very High Frequency Filter Operation
Selectable Gain 0, 10 or 20 dB
Small Package Size
On Chip Power Save Pin
ANSI Compatible Bandpass

applications

Spectrum Analyzers
General Purpose Systems
Portable Systems
Anti-Alias Filters
Telecommunications
Tracking Filters
Harmonic Analysis
Noise Analysis
Data Communication
Wireless Applications

downloaddatasheet

 
clomiphene mg acheter diflucan en ligne lansoprazole sans recette ketoconazole générique ketoconazole mg seroquel prix lamisil vente zyrtec pharmacie commande furosemide omeprazole générique
propecia prix quebec pantoprazole prix pas cher zyprexa plavix generique naproxen vente domperidone prix acheter venlafaxine en ligne acheter amoxicilline buspar générique imodium pharmacie